xBloom Tower

A modular coffee station for the xBloom Studio. Nine printed parts, magnets pre-fitted. Every module shares the same 132 × 95 mm footprint and snaps to the one below it, so you stack only what you use and restack whenever your bench changes.

Modelled from measurements taken off the machine itself. The door knob is the xBloom Studio's own button, remade at true size, knurled and threaded so it screws straight in.

What's in the box

• Brew station — angled top deck, Ø74 bowl, brush hole
• Filter box — Kalita Wave 155 filters stored upright
• Filter door — swing door with a magnetic catch
• Door knob — xBloom Studio button at true size, screws in
• Card holder — six card slots and a storage cubby
• Open shelf — 130 mm of open-front storage
• Base shelf — solid 27 mm plinth
• Drip tray — closed water tray
• Drip grate — patterned, lifts out for rinsing
• Replacement grate for the original xBloom tray
• Coffee bag clip
• Coffee spoon
• 62 magnets, already fitted — nothing to glue
• Printed manual, English and Arabic

Made to last

• Printed in PLA at 0.2 mm, four walls, no supports
• Joined with 5 × 3 mm magnets — six per joint, no glue anywhere
• Flat bed-facing faces, so every module sits true on the counter

Six colours

Brick Red · Desert Tan · Matte Black · White Panda · White · Sakura Pink

Manual

Download the full instructions before you build:

• Manual — English (PDF)
• الدليل — العربية (PDF)

When it ships

We keep a small number ready in each colour. If yours is in stock it leaves us within a day or two. If not, we print it for you — allow 3 to 14 days depending on the queue and the colour.

Printed to order in the UAE and finished by hand.